Interesting Research on Experts – What No One Ever Told You

The Procedure Used During Jump-Starting Your Car Because you do not know when your car battery will fail to work, you should be well equipped with knowledge on how to jump start your car safely. There are professional who are well experienced on the issues concerning car jump start who you should contact when you are not getting everything right because however much it can be easy, if you make an error it can be hazardous. Jumper cables are the main equipment that you should have when you are ready to jump start your car. The following procedures are to help you in jump starting your car safely. Your owner’s manual are to help you locate where your battery is or if you know where it is located the batter. The car providing the jump should be in a perfect position next to yours. If the car providing the jump is in a wrong position you might suffer the problem of the jumper cable not reaching your car battery so you should ensure that it is positioned well. The cars should be in a position where the jumpers cable should be able to reach their both batteries. The hoods of the two cars should remain opened and also the car giving the jump must remain shut off. Onto the battery of the car providing the jump, clamp one end of the jumper cables. There are two clamps of a jumper cable; one part is ideated red to stand for positive and black to stand for negative. The clamps Should be connected as follows; the red clam to the red terminal of the battery and the black clamp to the black terminal of the battery. The connection of the clamps according to the colors should be made in both the car that is providing the jump and your car and also avoid so much the contact between the two different clamps to avoid dangerous electrical spark.
5 Key Takeaways on the Road to Dominating Automobiles
The connection of the black clamp to the engine, reduces the spark produces around the battery. After all these procedures, you can now start the engine of the car giving you the jump and leave it to run for about ten minutes to help in the charging the dead battery. Check whether your car can now start by turning on the engine of your car.
5 Key Takeaways on the Road to Dominating Automobiles
There is a way you should remove the clamps from both batteries, that is, remove the black clamps and then followed by the red clamp after ensuring that your car engine can start. A car technician can help you identify if there I any problem that might have caused the battery to die.